Forums

We discovered that the tncart FW adapted for Wondertang is here :/p> now reading the readme it explains that the wondertang cartridge must be modified, if it is bo...

Once you've established the programming mode, follow the link above. Where's the info on how to use it as a tncart? Here are some steps on how to try out a few games...

Hi Daniele, Super Runner is produced by the company Pony Canyon JP which still exists, I advise you not to make it the same and to modify it as much as possible...

Hi Lorenzo, well, welcome, I know the 8020, I've always had that one. Its problem is that in the flats of the keyboard on the horizontal lines of the m...

Thanks Daniele!

I have several scanned MSX hardware manuals, most of them are also here or you can find them on emule, take a look here toohi A.

Hi, it can be done, but you have to build a relay board with 8 channels on the parallel pinout, but there are other ways, you can use the joy port...

Welcome, sometimes on ebay or Subito.it the VG8020 can also be found under 100 or 80 euros perhaps with some games or accessories... follow us on FB too...

Even I don't see it every now and then, try changing the slot, or inserting it again, in my slots for example the C2 tilts a little and then depending on...

@ozzyboshi Hi, as I wrote above, the CF formatting must be done from MSX and not from winXp. If MSX works well, i.e. it passes the RAM tests (ap...

You have to do the partition and formatting of the SD from MSX Basic with the FDISK and FORMAT calls, then put it on the PC and copy the files

Hi, the card must be formatted FAT16, and see if compatible here/p> if FAT16 and compatible it should start. In the video I also see some characters...

Thanks Horace! we are waiting for this chapter 😎

@libero Welcome! I hope you also like the msxitalia.org website and our FB page/p> See you soon! TO.